English
Tungsten Carbide Brazing Tips Head

Awọn ọja

Tungsten Carbide Brazing Italolobo Head ifihan Aworan
  • Tungsten Carbide Brazing Tips Head
  • Tungsten Carbide Brazing Tips Head
  • Tungsten Carbide Brazing Tips Head

Tungsten Carbide Brazing Tips Head

Ọpa iṣelọpọ Welding Of Ige egbegbe Ati Ọpa dimu YG6


  • Min.Oye Ibere:5 Nkan/Awọn nkan
  • Agbara Ipese:10000 Nkan / Awọn nkan fun oṣu kan
Whatsapp

Alaye ọja

ọja Tags

分割线分隔效果
Apejuwe

  • Awọn ẹya ara ẹrọ ti Tungsten carbide ohun elo

    1. Lile giga:
      1. Lile ti tungsten carbide jẹ giga gaan, keji nikan si diamond, eyiti o fun u ni resistance yiya to dara julọ. Nigba lilo ti àtọwọdá, o le fe ni koju ogbara ati yiya ti awọn alabọde, extending awọn iṣẹ aye ti awọn àtọwọdá.
    2. Idaabobo ipata:
      1. Tungsten carbide ni awọn ohun-ini kemikali iduroṣinṣin ati pe ko ni irọrun ni irọrun pẹlu awọn media ibajẹ bii acid, alkali, iyọ, bbl O le ṣee lo fun igba pipẹ ni awọn agbegbe ipata lile laisi ibajẹ.
    3. Idaabobo iwọn otutu giga:
      1. Ojutu yo ti tungsten carbide jẹ giga bi 2870 ℃ (tun mọ bi 3410 ℃), eyiti o ni resistance otutu giga ti o dara ati pe o le ṣetọju iṣẹ iduroṣinṣin labẹ awọn ipo iwọn otutu giga.
    4. Agbara giga:
      1. Tungsten carbide ni agbara giga ati pe o le koju titẹ pataki ati awọn ipa ipa, aridaju iṣẹ iduroṣinṣin ti awọn falifu labẹ awọn ipo iṣẹ lile.

 

  • Awọn abuda kan ti Tungsten carbide brazed awọn italolobo

    1. Lile giga ati resistance wiwọ:
      1. Lile giga ti tungsten carbide n fun ori brazing lalailopinpin lagbara resistance resistance, eyiti o le ṣetọju awọn eti gige didasilẹ lakoko lilo igba pipẹ, mu ilọsiwaju ṣiṣe ẹrọ ati didara gige.
    2. Imudara igbona to dara:
      1. Tungsten carbide, gẹgẹbi olutọpa ti o dara ti ina ati ooru, le ṣe ooru ni kiakia lati agbegbe gige, idilọwọ ikojọpọ ooru ati ibajẹ ọpa.
    3. Aaye yo giga ati iduroṣinṣin gbona:
      1. Aaye yo ti tungsten carbide jẹ giga bi 3410 ℃, eyiti o le ṣetọju iṣẹ iduroṣinṣin ni awọn agbegbe iwọn otutu giga ati pe ko ni irọrun tabi yo.
    4. Iduroṣinṣin kemikali ti o dara julọ:
      1. Tungsten carbide jẹ aifọkuba ninu omi, hydrochloric acid, ati sulfuric acid, ṣugbọn ni irọrun tiotuka ninu awọn acids adalu ti nitric acid ati hydrofluoric acid. O le ṣetọju iṣẹ iduroṣinṣin ni ọpọlọpọ awọn agbegbe kemikali.

 

  • Awọn anfani ti Tungsten carbide brazed awọn italolobo

    1. Lile giga ati resistance wiwọ:
      1. Tungsten carbide ni lile ti o ga pupọ, keji nikan si diamond ati cubic boron nitride, eyiti o jẹ ki awọn isẹpo brazed carbide ṣiṣẹ daradara ni gige ati wọ awọn ohun elo. Idaabobo yiya ti o ga julọ fa igbesi aye iṣẹ ti awọn irinṣẹ, dinku igbohunsafẹfẹ rirọpo, ati nitorinaa dinku awọn idiyele iṣelọpọ.
    2. Iduroṣinṣin igbona giga ati resistance ipata:
      1. Tungsten carbide le ṣetọju iṣẹ iduroṣinṣin ni awọn iwọn otutu giga ati pe ko ni irọrun bajẹ tabi yo. O ni resistance ipata to dara si ọpọlọpọ awọn kemikali ati pe o le ṣee lo ni awọn agbegbe ile-iṣẹ lile.
    3. Iṣẹ gige ti o dara:
      1. Ige eti didasilẹ ti ori brazing carbide le daradara ati deede ge awọn ohun elo, imudarasi ṣiṣe ṣiṣe ati didara. O dara fun gige awọn ohun elo oriṣiriṣi, pẹlu irin, ti kii ṣe irin, ati awọn ohun elo apapo.
    4. Agbara giga ati lile:
      1. Tungsten carbide brazed isẹpo ko nikan ni ga líle, sugbon tun ni awọn agbara ati toughness, eyi ti o le koju nla ipa ati awọn gbigbọn. Eyi jẹ ki o ṣiṣẹ daradara ni yiya ikolu ati awọn ohun elo ti o wuwo.
    5. Isọdi:
      1. Apẹrẹ, iwọn, ati iṣẹ ti awọn isẹpo brazed carbide le jẹ adani ni ibamu si awọn ibeere ohun elo kan pato. Eyi jẹ ki o pade ọpọlọpọ eka ati awọn ibeere ile-iṣẹ pato.
    6. Aje:
      1. Botilẹjẹpe idiyele akọkọ ti awọn isẹpo brazed carbide le jẹ ti o ga julọ, wọn ni eto-ọrọ igba pipẹ to dara julọ nitori igbesi aye gigun wọn ati ṣiṣe giga. Idinku igbohunsafẹfẹ rirọpo ati akoko idinku ti dinku awọn idiyele iṣelọpọ gbogbogbo.
    7. Ọrẹ ayika:
      1. Awọn isẹpo brazed carbonized ni ipa kekere kan lori agbegbe lakoko iṣelọpọ ati lilo. Ko ṣe ina egbin eewu ati pe o rọrun lati tunlo ati tun lo.

 

  • Ohun elo ti tungsten carbide brazing ori

    1. Awọn irinṣẹ gige:
    2. gẹgẹ bi awọn lu die-die, milling cutters, gige irinṣẹ, ati be be lo, le daradara ge ati ilana awọn irin
    3. Awọn irinṣẹ iwakusa:
    4. gẹgẹbi awọn ohun elo iwakusa iwakusa, awọn òòlù, awọn ọpa gbigbọn, ati bẹbẹ lọ, le ṣee lo ni awọn agbegbe iwakusa lile ati ni awọn abuda ti igbesi aye gigun ati ṣiṣe giga.
    5. Wọ bora sooro:
    6. Tungsten carbide tun le ṣee lo bi ohun elo ti a bo wiwọ lati mu ilọsiwaju yiya ati igbesi aye iṣẹ ti sobusitireti.

 

分割线分隔效果
Table Performance elo
Koluboti Binder ite
Ipele
 Tiwqn(% ni iwuwo) Ti ara Properties Iwọn ọkà (μm) Dédéédé
to
abele
Ìwúwo g/cm³(±0.1) LileHRA (± 0.5) TRS Mpa(iṣẹju) Porosity
WC Ni Ti TaC A B C
KD115 93.5
 6.0 - 0.5 14.90 93.00 2700 A02 B00 C00 0.6-0.8 YG6X
KD335 89.0 10.5 - 0.5 14.40 91.80 3800 A02
 B00 C00
 0.6-0.8 YG10X
KG6 94.0 6.0 - - 14.90 90.50 2500 A02
 B00
 C00
 1.2-1.6 YG6
KG6 92.0 8.8 - - 14.75 90.00 3200 A02
 B00
 C00
 1.2-1.6 YG8
KG6 91.0 9.0 - - 14.60 89.00 3200 A02
 B00
 C00
 1.2-1.6 YG9
KG9C 91.0 9.0 - - 14.60 88.00 3200 A02
 B00
 C00
 1.6-2.4 YG9C
KG10 90.0 10.0 - - 14.50 88.50 3200 A02
 B00
 C00
 1.2-1.6 YG10
KG11 89.0 11.0 - - 14.35 89.00 3200 A02
 B00
 C00
 1.2-1.6 YG11
KG11C 89.0 11.0 - - 14.40 87.50 3000 A02
 B00
 C00
 1.6-2.4 YG11C
KG13 87.0 13.0 - - 14.20 88.70 3500 A02
 B00
 C00
 1.2-1.6 YG13
KG13C 87.0 13.0 - - 14.20 87.00 3500 A02
 B00
 C00
 1.6-2.4 YG13C
KG15 85.0 15.0 - - 14.10 87.50 3500 A02
 B00
 C00
 1.2-1.6 YG15
KG15C 85.0 15.0 - - 14.00 86.50 3500 A02
 B00
 C00
 1.6-2.4 YG15C
KD118 91.5 8.5 - - 14.50 83.60 3800 A02
 B00
 C00
 0.4-0.6 YG8X
KD338 88.0 12.0 - - 14.10 92.80 4200 A02
 B00
 C00
 0.4-0.6 YG12X
KD25 77.4 8.5 6.5 6.0 12.60 91.80 2200 A02
 B00
 C00
 1.0-1.6 P25
KD35 69.2 10.5 5.2 13.8 12.70 91.10 2500 A02
 B00
 C00
 1.0-1.6 P35
KD10 83.4 7.0 4.5 4.0 13.25 93.00 2000 A02
 B00
 C00
 0.8-1.2 M10
KD20 79.0 8.0 7.4 3.8 12.33 92.10 2200 A02
 B00
 C00
 0.8-1.2 M20
Nickel Binder onipò
Ipele Akopọ(% iwuwo) Ti ara Properties   Dédéédé
to
abele
Ìwúwo g/cm3 (± 0.1) HRA lile (± 0.5) TRS Mpa(iṣẹju) Porosity Isọ ọkà (μm)
WC Ni Ti A B C
KDN6 93.8 6.0 0.2 14.6-15.0 89.5-90.5 1800 A02 B00 C00 0.8-2.0 YN6
KDN7 92.8 7.0 0.2 14.4-14.8 89.0-90.0 Ọdun 1900 A02 B00 C00 0.8-1.6 YN7
KDN8 91.8 8.0 0.2 14.5-14.8 89.0-90.0 2200 A02 B00 C00 0.8-2.0 YN8
KDN12 87.8 12.0 0.2 14.0-14.4 87.5-88.5 2600 A02 B00 C00 0.8-2.0 YN12
KDN15 84.8 15.0 0.2 13.7-14.2 86.5-88.0 2800 A02 B00 C00 0.6-1.5 YN15
  • Ti tẹlẹ:
  • Itele:
    • Kọ ifiranṣẹ rẹ nibi ki o si fi si wa

    jẹmọ awọn ọja

    Lu tẹ lati wa tabi ESC lati tii